TOFD V6 Universal Calibration Block made of carbon steel according to plan "OU001-0695" with a general geometric tolerance of +/- 0.1mm.

The TOFD V6 block consists of 5 steps ranging from 13 to 53 mm. Each step has a cut of length 15 mm, opening 0.2 mm, depth 3 mm and a flat bottom hole of diameter and depth 3 mm.

At the e of the edge of the block is a radius of 50 mm and a radius of 10 mm and 4 flat-bottomed holes with a diameter of 1.5 mm and a depth of 25 mm.

On one side of the block are implanted two notches of length 15 mm, opening 0.2 mm, depth 1 and 2 mm.

On the other side of the block is a notch of length 20 mm, opening 0.2 mm, depth 5 mm and 3 holes flat bottom diameter 1.5 mm and depth 25 mm.

The block is laser engraved and delivered with its support to allow easy calibration.

TOFD V6 Universal Calibration Block made of stainless steal according to plan "OU001-0695" with a general geometric tolerance of +/- 0.1mm.

The TOFD V6 block consists of 5 steps ranging from 13 to 53 mm. Each step has a cut of length 15 mm, opening 0.2 mm, depth 3 mm and a flat bottom hole of diameter and depth 3 mm.

At the e of the edge of the block is a radius of 50 mm and a radius of 10 mm and 4 flat-bottomed holes with a diameter of 1.5 mm and a depth of 25 mm.

On one side of the block are implanted two notches of length 15 mm, opening 0.2 mm, depth 1 and 2 mm.

On the other side of the block is a notch of length 20 mm, opening 0.2 mm, depth 5 mm and 3 holes flat bottom diameter 1.5 mm and depth 25 mm.

The block is laser engraved and delivered with its support to allow easy calibration.